10/100M Switch provide flexible 10/100Mbps throughput per port to the desktop, with features like auto-negotiation at dedicated band width. These systems offer smooth network migration and easy upgrades to network capacity.

 10/100M Switch has the following features:

• Complies with IEEE802.3, IEEE802.3u

• 8/16 x 10/100Mbps switching port

• Each port is capable of Auto-Negotiation

• Flow Control against data transfer loss

• One up-link slide switch is provide for cascading

• Visual diagnostic LEDs supported

•  Palm size and plastic chassis design

• Magnetic slot

• Internal Power Supply 100-240Vac/50-60Hz
   

UTP Patch Cable available in three different lengths (1, 2 and 3 meters) with five different colors (red, yellow, green, blue, and grey).

24/16 Port Patch Panel 19 inches rack mountable panels.
 

Fast Ethernet PCI Adapter 

• Conforms to IEEE802.3u and IEEE802.3 

• 32 bit PCI bus Rev 2.2 compliant

• Auto-negotiation for 10/1000 Mbps

• Visual diagnostic LEDs

• Full network OS driver support 

• 86 x 86 mm
• Provides 1 or 2-port angled solution
• Allow easy circuit identification using the Infilink labeling
• Shutters
• Iconable
• Suited for 110 connect and Toolless keystone jacks in UTP or Shielded version
• Can be wall mounted used a British style back box

CAT5e Keystone Jack

• Full CAT5e Channel Performance

• No Termination tool required

• Fits any standard face plate

CAT5e UTP Cable  (Box of 305 Meter)

• Full CAT5e Channel Test Compliant

• 1000 Base - TX (Gigabit Ethernet Compliant)

• ISO 11801, EIA/TIA 568A  EN 50173 Compliant

• Full ETL and UL certified

Boot-Cover

ADSL-Filters  

• Filters one or more phone devices sharing a single jack
• Blocks DSL/HPN signals from phone equipment to enhance voice-band signal
• Isolates DSL/HPN from phone equipment impedance for peak data performance
• Supports G.lite, G.dmt, ADSL, V.90, Caller ID and metallic-loop testing
• Compliant and listed with FCC, UL, CE, CSA and T1E1
• Compact in-line design—plugs into any standard phone jack
• Provides separate jacks for phone and DSL/HPN
• Plug and jack has minimum of 50 microinches of gold plating to prevent corrosion and ensure reliable electrical connections
• Customers with five or more telephone jacks should order a different filter. To ensure the highest possible voice quality and Caller ID for any subsequent jacks